查看: 280098|回复: 3658771164
打印 上一主题 下一主题

[复制链接]
pink pocket bikes
跳转到指定楼层
楼主
发表于 2018-01-16 02:20:34 | 只看该作者 |只看大图 回帖奖励 |倒序浏览 |阅读模式

When Kasper Albrekt decided to get a balance bike for his almost-two-year-old son Jakob, he had trouble finding one that got him excited. And rather than settling for stock offerings, he took matters into his own hands, building his potential future world champ the S-Walk—a one-of-a-kind, tricked-out balance bike that’s sure to be the envy of the playground.

Jakob Albrekt gets set to drop in on his custom S-Walk at a bike park near his home in Aarhus, Denmark.

Starting with a stock Specialized Hotwalk he bought from WeBike, in Aarhus, Denmark where he works, Albrekt stripped the bike down and sandblasted its tiny frame and fork. From there he began the customization, powder coating it matte black, welding on a rear disc brake mount, customizing the fork, and pretty much upgrading everything he possibly could.

“I could not find a kickbike, that was really nice,” explained Albrekt. “So I decided to convert a Specialized Hotwalk to an S-WORKS.”

S-WORKS is Specialized’s moniker for its high-end race or “works” products, and judging by the photos, we’re pretty sure Albrekt’s bike qualifies. But as simple as the little bike looks, it necessitated quite a few modifications to get the high-end bits to work.

To get a disc brake on the bike, not only did Albrekt have to weld a brake mount on the frame, he had to shave down the hub end caps, shrinking the width 5mm so the caliper and rotor could squeeze between the narrow stays. With less than 2mm between the frame and rotor, the disc rides almost as close to the stays as it does to the brake pads.

The rear wheel uses the Hotwalk’s stock tire and aluminum rim, but Albrekt laced it up with Union triple-butted titanium spokes that he shortened and rethreaded to fit the diminutive diameter. He then used every-other hole of the 32-hole Tune-branded hub, halving the spoke count to work with the 16-hole rim. He finished the wheel with red-anodized aluminum spoke nipples and a shortened and rethreaded Shimano XTR skewer.

To fit the front wheel Albrekt “only” needed to spread the fork blades to accommodate the wider front hub—in this case a WTB Grease Guard model. Not content to use the heavy, stock quill stem, he cut off the fork’s 1-inch threaded steerer tube and welded a non-threaded version in its place.

A Tange DX8 1-inch threadless headset makes for silky turning while the bike’s Specialized S-Works XC 500mm carbon bars are proportionately cut to give two-year-old Jakob plenty of leverage. They’re held on by a red anodized Tune 1-1/8-inch stem that’s been shimmed to work with the 1-inch steerer.


点击获取礼包
tornado bike
沙发
发表于 2018-01-16 02:20:41 | 只看该作者
folding electric bike parts
回复 支持 反对

使用道具 举报

trinx folding bike
板凳
发表于 2018-01-16 13:49:27 | 只看该作者
folding electric bike 80 manchester 1980http://bbs.zhige.net/forum-2-16.html
回复 支持 反对

使用道具 举报

wolf bike
地板
发表于 2018-01-16 09:40:54 | 只看该作者
folding electric bike finance southampton
回复 支持 反对

使用道具 举报

bmc bike
5#
发表于 2018-01-16 11:03:25 | 只看该作者
mountain electric bike for disabled kids
回复 支持 反对

使用道具 举报

giro cycling
6#
发表于 2018-01-16 11:49:02 | 只看该作者
electric road bike equipment uk
回复 支持 反对

使用道具 举报

velo electrique
7#
发表于 2018-01-16 04:36:43 | 只看该作者
ebike conversion kits+36v12ah bottle battery
回复 支持 反对

使用道具 举报

motor electrische fiets
8#
发表于 2018-01-16 07:36:37 | 只看该作者
26 inch folding electric mountain bike,electric bike motor 250W, china supplier
回复 支持 反对

使用道具 举报

elektrikbike
9#
发表于 2018-01-16 03:59:02 | 只看该作者
2018 new design folding electric bike made in china
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

thru axle 150mm full carbon fat bike fork是互联网最大的搜索引擎优化研究中心,是致力于培养学员用户体验意识和提供专业技术解答的专业培训机构, 成立于2007年,2008年第一家入驻歪歪的培训机构,2014年成为腾讯课堂战略合作机构。
© 2007-2016 thru axle 150mm full carbon fat bike fork 湘ICP备13004652号-1 Powered by Discuz!X  Template by thru axle 150mm full carbon fat bike fork 
快速回复 返回顶部 返回列表